Mon. Nov 28th, 2022

Remodelling and designing any home is sure to be a rewarding and exciting experience. Ceramic tiles are said to offer more options and benefits when compared to non-ceramic materials. There are readily available a variety of ceramic tile types that collectively make up ‘ceramic tile family’. It includes porcelain tiles, mosaic tiles, wall tiles, pressed floor tiles, quarry tiles, etc. Each tile subset tends to share benefits derived from ceramic tiles. They are also produced somewhat differently to suit specific applications.

What is porcelain tile?

This type is known to absorb water by 0.5 percent or even less. Besides this, the largest among ceramic tile family is considered to be gauged porcelain tile slabs/panels. Its length is about 15’ and wide around 5’. The manufacturing process involves firing clays at high temperature. The results derived are smooth, fine-grained, impervious, dense tile. Usually, they have lower rate of water absorption when compared to ceramic tiles. Thus, they are frost-resistant, however, not frost-proof.

Other features

Glazed porcelain tiles are more damage-resistant and much harder when compared to ceramic tiles. They can suit any type of indoor applications in residences. Porcelain tiles mostly have 5 PEI rating. Their durability and low porosity is what makes porcelain tiles an ideal choice for wet zones like bathroom counters and showers as well as high traffic areas. If selected with proper care, it is possible to install them anywhere in the home.


  • Glazed: It is covered fully in hard or wear layer finish and has typical colours. This tile is equally dense and strong providing a variety of designs and colours.
  • Through-bodied: Texture and colour tends to run throughout this tile, thereby disguising scratches and chips. Being durable and strong, it does not contain any glaze that might wear off. Hence it is best used on countertops, walls and floors.

What makes it a favourite among homeowners?

  • Strength and durability: These are undoubtedly the most important factors to consider. Porcelain tile can withstand splashed water and heavy foot traffic for a long time.
  • Underlayment: These tiles are generally installed on the subfloor, which is rigid, flat and smooth. It can be installed on cement-based backer board, concrete slab and existing tile.
  • Cleaning: Porcelain tiles can be cleansed easily. Vacuum or sweep regularly, wipe water immediately and every week damp mop the surface. Do not use abrasives like scouring pads and steel wool. Frequent cleaning will be desired for unglazed porcelain.

Any negatives?

If there is no radiant heat underneath, it is quite natural for the tiles to get cold. Walking or standing for long periods on bare feet can be a problem. Moreover, grout is prone to get stained while the tiles might crack. Cutting and installing porcelain can be tough task since it is a hard material. Usually, installation is best done by the industry professionals as they will have the right tools to do the job.

Why consider porcelain tiles for your home?

  • Low maintenance: Besides looking visually appealing, the material that you wish to install in your home should also require less maintenance and care. Porcelain and ceramic tile surfaces come with inherent resistance properties. It is waterproof, resists stains, does not trap allergens and dirt since they have impervious and hard surfaces. It also does not develop any scratch while its colour can appear as good as new for a long time.
  • Healthy and Hygienic: These tiles do offer health benefits, thereby promoting healthy home. Lack of PVC (polyvinyl chloride), formaldehyde or VOCs (volatile organic compounds) ensures health concerns are kept away. Moreover, they are hypoallergenic, meaning not causing allergic reactions. Its non-porous surface does not support penetration of dust or allergens. Thus, it helps improve indoor air quality. They are bacteria-resistant with antimicrobial properties. But make sure to buy only superior quality porcelain floor tiles on sale.
  • Safe: These tiles are non-inflammable. This means, they don’t emit toxic fumes, produce smoke or burn. It also helps reduce spreading of flames. Thus, it is a suitable material for areas around firepits, fireplaces and for kitchen applications. Its slip-resistant features make it ideal for flooring especially in moisture-rich areas like the pool deck, shower and the kitchen. Thus, your family is well-protected from the common dangers.
  • Sustainable: If you want to protect the environment in your own way, then choose porcelain tiles. A smart choice of material is one that meets perfectly your aesthetic desires, but without harming the environment. It should be sustainably manufactured, recycled and used. Ceramic tile family can be termed to be naturally occurring, energy efficient, durable, salvageable, recyclable, ensures clean disposal. When compared with other available flooring materials, porcelain tiles enjoy the tag of leaving behind very low carbon footprint.

A wise choice

Porcelain tiles are considered to be harder than ceramic. Hence, they do make smart choices for walls, countertops and floors. They are also popular for their countless design choices, beauty and durability.

Leave a Reply

Your email address will not be published. Required fields are marked *